Which Scrap Metal Permit Fits Your New Jersey Yard? Questions That Decide SM vs. SM2

Written By: Tate Hunter | Last Updated: November 17, 2026

Time to Read 14 Minutes

Which Scrap Metal Permit Fits Your New Jersey Yard? Questions That Decide SM vs. SM2
13:43

The Questions That Decide Between SM2, the Vehicle Recycling Permit, and an Individual Permit for Your Scrap Metal Yard

If you run a scrap metal yard in New Jersey, you've probably run into two permit names that look almost identical, SM and SM2, and wondered which one is yours. The New Jersey Department of Environmental Protection (NJDEP) expects scrap metal and vehicle recycling operations to hold a stormwater permit, because rain that lands on piles of metal, fluids, and oily parts picks up pollutants on its way to a creek, a storm drain, or the ground. NJDEP handles this through its NJPDES program, the New Jersey Pollutant Discharge Elimination System, and scrap yards get an industry-specific general permit instead of the one-size-fits-all option.

The short answer is that SM is gone. NJDEP lists the original SM permit as expired and no longer available, so SM2 is the scrap metal general stormwater permit you'd be working under today. That turns the real question into something more useful: is SM2 the right permit for your particular yard, or does what you do on site point you to the vehicle recycling permit, an individual permit, or a different category altogether? This guide walks through the questions that decide it, and if you'd rather have a second set of eyes on your site, you can reach out to RMA at any point.

Table of Contents

TL;DR

New Jersey's original SM scrap metal stormwater permit has expired, so SM2 is the scrap metal permit NJDEP offers today. Whether SM2 fits your yard depends on what you do on site. Scrap metal recycling, with or without vehicle parts, points to SM2, vehicle-only recycling points to the separate RVR permit, and shredding or mixed recycling often points to an individual permit. Where your stormwater goes matters too, and NJDEP is inspecting permitted scrap yards, so confirm your category before you file anything.

What Is the Difference Between the SM and SM2 Scrap Metal Permits in New Jersey?

The old SM permit (NJ0107671) was the first generation of New Jersey's scrap metal stormwater permit, and NJDEP's permit page now marks it expired and no longer available. The replacement, SM2 (NJ0163261), is the one NJDEP says is available to facilities that meet the eligibility criteria written into the permit. It authorizes stormwater discharges from facilities that recycle scrap materials, and from facilities that do both scrap metal recycling and recycling of used vehicle parts. If someone tells you your yard is "on the SM permit," that's worth double-checking against your actual authorization letter, because SM isn't available to new applicants.

Like other New Jersey general permits, SM2 isn't automatic. You submit a request for authorization (RFA) to NJDEP, and NJDEP's rules say that unless the permit says otherwise, the request has to include the forms, information, signatures, and certifications an NJPDES application would. We cover the permit's history, deadlines, and requirements in our explainer on the NJ SM2 scrap metal permit, so this post stays on the decision itself. We're also not restating SM2's issue and renewal dates here, because NJDEP's permit page is the place to confirm current status before you rely on any of them.

NPDES permitting and water management small businesses
NEW JERSEY NJPDES & STORMWATER
Visit the New Jersey NJPDES & Stormwater Help Center
5G2, industry-specific and individual NJPDES permits, Permanent No Exposure, SWPPPs, costs, and how RMA helps you get permitted and stay compliant, all in one place.
Go to the Help Center

Scrap Metal, Vehicle Recycling, or Both: Does SM2 or the RVR Permit Fit Your Yard?

This is the first question to answer, and it sorts out most yards. NJDEP has described its scrap metal permit as covering scrap metal recycling with or without vehicle recycling, and it has a separate Vehicle Recycling General Permit, known as RVR, for sites that only recycle vehicles. In plain terms, a yard that buys, sorts, and processes scrap metal sits under SM2 even if it also pulls parts off vehicles. A salvage yard that only dismantles vehicles and sells parts, with no scrap metal processing, sits under RVR. They're different permits with different requirements, so picking the wrong one means you're operating without the right authorization.

What you do on site Where you likely land What to confirm
Buy, sort, and process scrap metal SM2 scrap metal general permit Your activities match SM2's eligibility criteria
Scrap metal processing plus dismantling vehicles or pulling used parts SM2, which covers both Vehicle work is covered alongside scrap metal, not instead of it
Only dismantle vehicles and sell parts RVR vehicle recycling general permit You really don't process scrap metal on the side
Shred metal Usually an individual NJPDES permit How SM2 defines the activities it covers
Scrap metal plus other recycling, or scrap as a side activity Depends: SM2, an individual permit, or another category A conversation with NJDEP before you file

Treat the table as a starting point, not a ruling. NJDEP decides eligibility based on the permit's own criteria, and a yard with an unusual mix of activities can land somewhere the table doesn't predict.

NPDES permitting and water management small businesses
NEW JERSEY NJPDES & STORMWATER
Visit the New Jersey NJPDES & Stormwater Help Center
5G2, industry-specific and individual NJPDES permits, Permanent No Exposure, SWPPPs, costs, and how RMA helps you get permitted and stay compliant, all in one place.
Go to the Help Center

Do You Shred Metal? Why Shredders Usually Need an Individual NJPDES Permit

Shredding is the activity most likely to push a yard off the general permit. In our experience, metal shredders don't fit under SM2 and generally need an individual NJPDES permit, which NJDEP writes for a specific facility instead of issuing off a shelf. An individual permit usually means a longer process, site-specific conditions, and more back and forth with NJDEP, so it's worth knowing early which side of the line you're on. Our article on whether you need an individual NJPDES industrial permit walks through when a general permit stops fitting.

Don't rely on our word alone for this one. Read SM2's eligibility section or call NJDEP's stormwater permitting bureau, because the answer for a particular piece of equipment turns on how the permit defines the activities it covers. A shredder also brings requirements outside stormwater, such as solid waste approvals, and this post stays on the stormwater side.

new-jersey-scrap-metal-sm-vs-sm2-permit

What If Your Yard Does More Than Scrap Metal? Mixed Operations and the 5G2 Basic Permit

Plenty of yards do more than buy and sort metal. Some also take in other recyclables, such as wood, plastics, or construction debris, and some are a manufacturer or hauler that happens to run a scrap area. SM2 is written for scrap metal recycling, with or without vehicle parts. When a yard also recycles other types of material, it may not fit the scrap metal permit and could need an individual permit instead. A business whose main activity is something else may land in another category altogether, and many industrial facilities end up on the Basic Industrial Stormwater General Permit, known as 5G2, which we explain in our guide to the 5G2 basic industrial stormwater permit in New Jersey.

The practical advice is to describe every activity on the site when you talk to NJDEP or a consultant, including the ones that feel minor. Permit categories follow what happens at the facility, so a tidy, single-purpose yard has an easy answer and a mixed operation deserves a careful conversation before anyone files an RFA. If you're still sorting out how the categories fit together, our overview of which NPDES permit you need is a good companion read.

NPDES permitting and water management small businesses
NEW JERSEY NJPDES & STORMWATER
Visit the New Jersey NJPDES & Stormwater Help Center
5G2, industry-specific and individual NJPDES permits, Permanent No Exposure, SWPPPs, costs, and how RMA helps you get permitted and stay compliant, all in one place.
Go to the Help Center

Where Does Your Scrap Yard's Stormwater Go? Discharge Points and the No Exposure Option

Where your rain goes matters for permit eligibility as well as for sampling. SM2 covers discharges to surface water and to groundwater, so a yard that sheet-flows to a stream, one that sends water through a storm sewer, and one that lets water soak into the ground can all fall under it. What you need to work out is which of those describes your site, and whether any of your water leaves by a different route, such as the sanitary sewer. If your site drains to a sewerage authority, that authority's rules may apply instead of, or alongside, an NJPDES stormwater permit, so confirm with the authority before assuming either way.

It's also worth separating rainwater from process water. Water from washing equipment, draining vehicle fluids, or cleaning a pad isn't stormwater, and it generally needs to be handled separately from your stormwater permit. Our piece on the difference between stormwater and process water explains how to tell them apart. NJDEP does have a no exposure exclusion for facilities where industrial materials never touch rain, but scrap yards rarely qualify because scrap, vehicles, and equipment sit outdoors by nature. A fully enclosed operation is the exception, and our explainer on what non-exposure means covers how that works.

What Does Holding an SM2 Scrap Metal Permit Require Day to Day?

Once you hold SM2, the work becomes routine, and it's the routine that NJDEP inspectors check. In October 2025, NJDEP issued Compliance Advisory 2025-11, which announced that its Division of Water Enforcement will inspect all permitted scrap metal and vehicle recycling facilities. The advisory says minor noncompliance may bring a Notice of Violation with corrective actions, while serious violations or unfinished corrective actions can lead to formal enforcement and penalties. It adds that facilities operating without a required permit may face enforcement too. If you've already received a Notice of Violation or an enforcement letter, an environmental attorney can be a sensible addition to the team.

The advisory lists several requirements as "some, but not all" of what inspectors look for. Fluids, oily parts, and oily scrap belong on covered, contained, impervious surfaces, with hoods down on processed vehicles. Draining and dismantling should happen indoors or under cover, spill kits should be on hand, and every employee needs spill response training each year. You also need a Stormwater Pollution Prevention Plan, or SPPP, kept at the facility, along with documented inspections at least quarterly. SM2 holders sample stormwater quarterly, submit the results, and add best management practices or treatment if discharges exceed the permit's design criteria. NJDEP also expects notice when ownership changes or the business closes, and the permit calls for a drainage control plan that maps how water moves across your yard. Our overview of NJPDES permit requirements gives the wider picture, and if you need a way to handle the annual training, our online environmental training library is one option.

Plenty of yard managers handle quarterly inspections and sampling in-house, and we'd rather help your team do that well than take it over. Our article on why you should take your own stormwater samples makes that case in more detail, and if the plan itself is new to you, here's what a stormwater pollution prevention plan is (our article uses the federal term, and New Jersey calls it an SPPP).

NPDES permitting and water management small businesses
NEW JERSEY NJPDES & STORMWATER
Visit the New Jersey NJPDES & Stormwater Help Center
5G2, industry-specific and individual NJPDES permits, Permanent No Exposure, SWPPPs, costs, and how RMA helps you get permitted and stay compliant, all in one place.
Go to the Help Center

What Drives the Cost of a Scrap Metal Stormwater Permit in New Jersey?

We won't quote a single number here, because the total depends on factors that vary from yard to yard. The permit category matters first: an individual permit is a bigger undertaking than a request for authorization under a general permit. Next comes your site, including how large the yard is, how complicated the drainage is, and how many places water leaves. Whether you already have an SPPP and a drainage control plan, or you're starting from scratch, changes the work involved. Then there are the ongoing costs, which include quarterly laboratory analysis, staff time for inspections and sampling, and the annual fees NJDEP charges permit holders.

Fees and lab costs shift over time, so check NJDEP's current fee information instead of trusting an old figure, ours included. The calculator below gives you a ballpark for RMA's help with the permitting side, which is separate from what NJDEP and your lab charge.

NPDES Permitting Pricing Calculator

How Can RMA Help You Choose the Right Scrap Metal Stormwater Permit?

We're based in New Jersey, and we work with scrap and recycling operations on exactly this question: which permit fits, and what it takes to stay in compliance once you have it. If you're not sure whether you belong under SM2, RVR, or an individual permit, we can look at what you do on site and where your water goes, and give you a straight answer. If the answer is that you don't need us, we'll tell you that too. RMA also handles New Jersey recycling approvals, which can come up for yards that process other recyclable materials.

There's no pressure and no obligation. You can call us, email us, or fill out the form on our website, and you can contact RMA whenever it suits you.

Additional NJPDES Permitting Information

EVERYTHING You Need to Know About NPDES Stormwater Permits

Learn about NPDES Stormwater Permits, timelines, costs, and compliance essentials for businesses to manage environmental responsibilities effectively.

Contact Our Team

Talk to a New Jersey NJPDES Expert

Maybe you know you need a permit but don't know which one. Maybe you have an old 5G2 authorization, a stormwater plan that's out of date, or a letter from NJDEP asking for information. Or maybe you're just trying to figure out whether your outdoor operations count as industrial stormwater exposure.

Tell us a little about your New Jersey facility and what you're trying to solve. RMA can review the situation, explain the likely permitting options, and talk through the work, timeline, and cost involved.

Additional NJPDES & Stormwater Permitting Resources

Looking for more info? Check out all of our New Jersey NJPDES & stormwater articles here!

New Jersey NJPDES Essentials

NPDES & Stormwater Basics

Stormwater Pollution Prevention Plans (SWPPPs)

NPDES & Stormwater Sampling

NPDES & Stormwater Monitoring & Reporting

NPDES & Stormwater Training

Misc. NPDES & Stormwater Topics

Tags:

Have a Question? Get Answers from an Expert!

888-RMA-0230

Copyright © Resource Management Associates