Written By: Dennis Ruhlin | Last Updated: November 19, 2026
Time to Read 10 Minutes
You pull out your SPCC Plan, the written oil spill prevention plan that federal rules require once a facility stores more than 1,320 gallons of aboveground oil, and flip to the certification page. There's an engineer's name, a stamp, and a date from several years back. Then you learn that the engineer retired, closed the firm, or simply can't be reached, and now you're not sure who's allowed to touch the plan.
The short answer is that you're in better shape than it feels. Your plan doesn't expire when the engineer leaves, and any licensed Professional Engineer (PE) can review it, certify changes to it, or certify the whole thing fresh. Below we cover who can step in, what a new engineer looks at, and why the handoff is a good chance to clean up older problems. If you'd like a hand, you can reach out to RMA.
TL;DR
If the engineer who certified your SPCC Plan has retired or disappeared, the plan is still in effect, and nothing in the federal rule says the same engineer has to certify future changes. Any licensed PE can review the plan, certify amendments, or certify the plan as a whole. Expect a site visit and a check of the plan against what's on the ground. Anything out of date can be fixed during that review, which makes the handoff a good time to bring an older plan current.
Nothing in the federal SPCC rule, 40 CFR Part 112, ties a plan to the engineer who signed it. The rule says a licensed PE must review and certify the plan, and the engineer attests to knowing Part 112, to a site visit by them or an agent, to good engineering practice, and to the plan being adequate for the facility. That's a statement about the plan on the day it was signed. It doesn't lapse because the person who made it retired.
What changes over time is the facility. Tanks get added, containers move, and piping gets rerouted, so the plan on the shelf drifts away from the site. The old certification can't cover changes the engineer never saw. After a retirement, the question is whether the plan still matches your site and who will certify the parts that don't. Certification also never took the job of running the plan off your plate, so your monthly inspections, records, and training continue as usual. EPA Region 3 enforces the rule in Pennsylvania, and it looks at your facility, not the cover page.
Any licensed PE can. The rule doesn't require the same engineer or the same firm. When a change at your facility materially affects the chance of a discharge, like new containers, changed containment, or rerouted piping, you amend the plan within six months and put the amendment into practice within six months after that. Technical amendments like those need a PE's certification. Administrative updates, such as a new phone number on the contact list, generally don't, and our post on keeping a plan going after its author leaves covers those.
Some facilities never needed an engineer. Smaller qualified facilities can self-certify, though parts of a plan that carry PE certification, like an alternative containment measure, still need one when they change. Our posts on self-certifying in Pennsylvania and qualified facility status will help you sort out which group you're in. Whether the engineer needs a Pennsylvania license is a separate question we've covered on its own, and it's worth asking any candidate up front.

Expect the new engineer to treat this like any other certification, because it is one. They won't sign a plan they haven't checked, and you wouldn't want an engineer who would. The site visit can be made by the PE or by an agent working for them, and the review compares the written plan against what's physically there.
| What the engineer checks | What it looks like at your site |
|---|---|
| Oil inventory | Containers of 55 gallons or more and oil-filled equipment, matched to the plan's list |
| Secondary containment | Whether it can hold the largest container plus rainfall |
| Overfill, piping, transfers | Alarms, gauges, delivery procedures, and where a spill would run |
| Records | Inspection logs, integrity testing, training, and a signed five-year review |
Two outcomes are common. Either the plan matches the site and gets certified with little change, or the review turns up gaps that get fixed through amendments the engineer then certifies. Some engineers certify only the amendment, but many prefer to review the whole plan, since their stamp will sit next to a document they didn't write. Timing depends mostly on the size of your facility and the state of your records.

Orphaned plans tend to share the same handful of problems, and none of them is unusual. The inventory lists a tank that was replaced years ago. Containment was sized for a smaller container. Integrity testing records are missing, the diagram shows a layout that's since changed, and the five-year review was never signed. An engineer who finds these will usually say so without drama.
A new certification brings the plan and the facility back into agreement, which an engineer's retirement doesn't do on its own. It's a convenient time to catch up on a lapsed five-year review, recheck containment with our guide to sizing SPCC containment, and schedule any overdue integrity testing. Fixing these on your own schedule beats having an inspector, a customer, or an insurer find them first.
Start by checking whether the firm that wrote the plan still exists. Engineers retire, but their firms often have other PEs and the original files. If the firm is gone, look for an engineer with real SPCC experience, since general civil or structural engineers don't always know Part 112 well. Ask each candidate three things: whether they hold a Pennsylvania license, who will visit the site, and whether they'll certify only the changes or review the whole plan.
Cost depends on the number of containers, the size of the site, and how current the plan is, so a flat figure wouldn't mean much. Our post on why PE-certified plans cost more walks through the drivers, and our look at what a PE does when certifying a plan shows what you're paying for.
We don't have a PE on staff. When a plan needs engineer certification, we work with an outside PE licensed for the state the plan is for. Our people usually handle the site visit and the plan itself, and the engineer then reviews, stamps, and seals it. On an orphaned plan, we start by looking at what you have. We typically don't update another firm's plan, and in most cases we rebuild it from scratch, since that's cleaner than reverse-engineering someone else's document (our post on whether a plan can be updated explains more). Our SPCC plans run about $1,500 to $15,000 depending on the facility, with Tier I plans around $1,500 to $4,000, and plans that need engineer certification cost more because of the review. Initial SPCC training is free with a new plan, and our online training library covers the rest of your team.
We'll also tell you when you don't need us. If the firm that wrote your plan is still around, or only one small change needs certifying, a local engineer may be all you need. If you'd like a second set of eyes on where your plan stands, you can call, email, or fill out the form on our website and talk with our team. There's no obligation, and you'll get a straight answer.
Understand the SPCC Plan and related oil storage requirements in Pennsylvania, including tank regulations, Tier II reporting, and stormwater permits for oil facilities.
Not sure whether your facility needs an SPCC Plan? Have an existing plan that's due for review? Or do you already know you need one and just want to get the project moving?
Tell us a little about your Pennsylvania facility, the oil you store, and what you're trying to accomplish.
RMA can help you understand which requirements apply, whether you need a new plan or an update, what the project would involve, and what it may cost.
There's no need to have everything figured out before reaching out. That's what we're here to help with.
Want to dig deeper? Check out these additional resources to get a clearer understanding of the SPCC world and how it applies to your facility.
Tags: Pennsylvania SPCC Plans
Whether you need help with a single requirement or want to hand off your entire environmental program, we get it done right, the first time. You'll feel protected, confident in your company's regulatory standing, and ready for whatever comes next.
Tel: 888-RMA-0230 | Email: info@rmagreen
Copyright © Resource Management Associates